SPECIFICATIONS:

1-MORI SEIKI ZL153SMC MULTI AXIS CNC LATHE WITH TWIN TURRETS,
  MILLING ON BOTH TURRETS, SUB SPINDLE, FULL C AXIS AND BAR FEEDER
  MACHINE SERIAL NUMBER ZL150CA0286
  APPROX. DATE OF MFG. 03/2003
  STK# 102624
=================================================================
SPECIFICATIONS SUBJECT VERIFICATION:
SWING OVER BED 26.77"
SWING OVER CROSS SLIDE 20.08"
MAXIMUM DISTANCE BETWEEN SPINDLE NOSES 29.72"
MAXIMUM TURNING DIAMETER
 TURRET (1) 17.32"
 TURRET (2) 12.67"
MAXIMUM TURNING LENGTH 18.54"
STANDARD TURNING DIAMETER
 TURRET (1) 6.69"
 TURRET (2) 5.31"
THIS IS THE MAX WORK PIECE DIAMETER FOR CARRYING TO HEADSTOCK 2
BAR WORK CAPACITY 1.77"
X AXIS TRAVEL 9.25" TURRET 1 (8.66" + .59")
X AXIS TRAVEL 6.89" TURRET 2 (6.34" + .55")
Z AXIS TRAVEL TURRET (1) 21.64"
Z AXIS TRAVEL TURRET (2) 19.29"
B AXIS TRAVEL SPINDLE (2) 21.85"
*SPINDLE ONE SPECS*
NUMBER OF SPINDLE SPEED RANGES 2
SPINDLE SPEEDS 50-5,000 RPM
TYPE OF SPINDLE NOSE JIS A25
THROUGH SPINDLE HOLE DIAMETER 2.20"
MINIMUM SPINDLE INDEXING ANGLE .001
INNER BEARING DIAMETER 3.54"
CHUCK SIZE RECOMMENDED 6" SOLID OR HOLLOW BODY
*SPINDLE TWO SPECS*
NUMBER OF SPINDLE SPEED RANGES 2
SPINDLE SPEED RANGE 50-5,000 RPM
TYPE OF SPINDLE NOSE JIS A25
THROUGH SPINDLE HOLE DIAMETER 1.69"
MINIMUM INDEX ANGLE .001
SPINDLE BEARING INNER DIAMETER 3.14"
RECOMMENDED CHUCK 5" HOLLOW WITH DISCHARGER
*TURRET ONE SPECS*
TYPE OF TURRET 12 POSITIONS
NUMBER OF TOOLS ON TURRET 12
SQUARE SHANK HEIGHT OF TOOL 3/4"
SHANK DIAMETER OF BORING BAR 1.25" OR 1" FOR DUAL BORING BAR HOLDERS
*TURRET TWO SPECS*
TYPE OF TURRET 12 STATION
NUMBER OF TOOLS ON TURRET 12
SQUARE SHANK HEIGHT OF TOOL 3/4"
SHANK DIAMETER OF BORING BAR 1.25" OR 1" FOR DUAL BORING BAR HOLDERS
*ROTARY TOOL SPINDLE 1*
ROTARY TOOL SPINDLE SPEED RANGE 3,000 RPM
ROTARY TOOL MACHINING CAPACITY DRILL MAX. 13 TAP MAX. M12
*ROTARY TOOL SPINDLE 2*
ROTARY TOOL SPINDLE SPEED RANGE 3,000 RPM
ROTARY TOOL MACHINING CAPACITY DRILL MAX. 10 TAP MAX. M6
*FEEDRATE*
RAPID TRAVERSE RATE X1,X2 708.66 IPM
                    Z1,Z2 944.88 IPM
JOG FEED RATE 0-49.6 IPM
*MOTORS*
SPINDLE 1 DRIVE MOTOR 7.5 HP CONT. 10 HP 30 MIN.
SPINDLE 2 DRIVE MOTOR 5.5 HP CONT. 7.5 HP 30 MIN.
ROTARY TOOL 1 DRIVE MOTOR 2.8 HP CONT. 3.8 HP 30 MIN.
ROTARY TOOL 2 DRIVE MOTOR 1.4 HP CONT. 1.9 HP 30 MIN.
FEED MOTORS X1 3.75 HP
            X2 2.41 HP
            Z1 2.81 HP
            Z2 2.81 HP
            B  2.81 HP
HYDRAULIC PUMP MOTOR 1 HP
LUBRICANT PUMP MOTOR .03 HP
COOLANT PUMP MOTOR .7 HP X 3
COOLING OIL PUMP MOTOR .5 HP FAN .07 HP
*POWER SOURCES*
ELECTRICAL POWER SUPPLY CONTINUOUS RATING 40.3 KVA
COMPRESSED AIR SUPPLY 71.1 PSI@26.4 GPM
*TANK CAPACITIES*
HYDRAULIC OIL TANK 5.54 GALLONS
LUBRICANT TANK 1.58 GALLONS
COOLANT TANK 66 GALLONS
OIL COOLER TANK 3.7 GALLONS
*MACHINE SIZE*
MACHINE HEIGHT 82.91"
FLOOR SPACE 156.22" X 84.65"
WEIGHT 12,430 LBS
*FORCE & DIAMETET*
CLAMPING FORCE OF CHUCK 8800 LBF
COUPLING DIAMTER 8.27"
BALL SCREW DIAMTER & PITCH (X) 1.1" X 6 (Z) 1.42" X 12

EQUIPPED WITH:
MORI SEIKI MSG501 CNC CONTROLS WITH MAPPS CONVERSATIONAL CONTROLS
MAYFRAN CHIP CONVEYOR AND COOLANT TANKS AND PUMPS
CHIP BLASTER HIGH PRESSURE HIGH VOLUME COOLANT SYSTEM W/FILTRATION
 MODEL JV8-1000
IEMCA SERVO BAR FEEDER MODEL VIP80E, TYPE 16, S/N 0200343001

WWW.RABIND.COM
586-752-0090



OUR ASKING PRICE.......: $Please call