Trumpf 8002, Used, 2008, S/N E01853A0002

This used Trumpf 8002 (2008) is a unit available from R.A.B. Industries. It is equipped with the nan controller. 1-USED TRUMPF TRUDISK 8002 LASER SERIAL NUMBER E01853A0002 DATE OF MFG. 2008 STK#105207 ======================================== SPECIFICATIONS WHILE OBTAINED FROM SOURCES DEEMED RELIABLE ARE SUBJECT TO CHANGE WITHOUT NOTICE AND TO VERIFICATION BY BUYER: The TruDisk is a high-power solid-state laser for the welding, cutting, and surface processing of metals -100% consistent power output Stable processes through integrated, active laser power control ensure reproducible results. - Maximum beam quality As a laser medium, the disk in the TruDisk ensures brilliant beam quality up to 2 mm·mrad. Robust against reflectionThe patented resonator design means that your TruDisk can also process highly reflective materials. -Intelligent energy management Multiple energy-saving modes and the power factor correction reduce the power requirement. - Low-spatter weldingWith BrightLine Weld you can achieve high-quality welding seams with minimal spatter formation. -Flexible cooling conceptChoose between an integrated heat exchanger (standard) and compressor cooler (optional). LASER PARAMETERS LASER POWER ON THE WORKPIECE 8,000 WATTS TYPICAL POWER CONSTANCY AT RATED POWER ± 1 % with active power regulation CONTINUOUSLY ADJUSTABLE POWER RANGE 160 W with active power range BEAM QUALITY AT THE INPUT COUPLING IN THE LLK 8 mm▪mrad NUMERICAL APERTURE ON THE OUTPUT COUPLING AFTER LLK 0.1 WAVELENGTH 1030 nm MINIMUM LASER LIGHT CABLE DIAMETER 200 μm TYPICAL POWER CONSTANCY AT RATED POWER OVER 8 HOURS AT CONSTANT AMBIENT TEMPERATURE ± 0.5 % WIDTH 1175 mm HEIGHT 1430 mm DEPTH 725 mm MAXIMUM NUMBER OF LASER LIGHT CABLES 2 MAXIMUM NUMBER OF LASER LIGHT CABLES FOR EXTENDED DEVICE SIZE 4 PROTECTION CLASS IP54 AMBIENT TEMPERATURE 10 °C - 50 °C 39 KW/40KVA/56AMP