FANUC S-500iB Robot, RJ3iB Control, Used, 2003, S/N F56891

This used FANUC S-500iB (2003) is a robot available from R.A.B. Industries. It is equipped with the RJ3iB controller and 6-axis configuration. 1-USED FANUC S-500iB WITH RJ3iB CONTROL 15KG X 2757MM REACH 6 AXIS ROBOT SERIAL NUMBER F56891 TAG 1590 DATE OF MFG. 02/2003 STK#103921 ============================ SPECIFICATIONS WHILE OBTAINED FROM SOURCES DEEMED RELIABLE ARE SUBJECT CHANGE WITHOUT NOTICE AND TO VERIFICATION BY BUYER: TESTED AND READY TO RUN HOURS SHOWN ON METER 12,864.4 Robot Specifications: Axes: 6 Payload: 15.00kg H-Reach: 2757.00mm Repeatability: ±0.1500mm Robot Mass: 610.00kg Structure: Articulated Mounting: Floor, Inverted, Angle Robot Motion Speed: J1 170 °/s (2.97 rad/s) J2 170 °/s (2.97 rad/s) J3 200 °/s (3.49 rad/s) J4 335 °/s (5.85 rad/s) J5 360 °/s (6.28 rad/s) J6 600 °/s (10.47 rad/s) Robot Motion Range: J1 ±160° J2 +100° - 60° J3 +149° - 119° J4 ±240° J5 ±120° J6 ±450° EQUIPPED WITH: RJ3iB CONTROLLER CABLES TEACHPENDANT 7TH & 8TH AXIS AUXILIARY DRIVES Robot Applications: Dispensing Robots Machine Loading Robots Material Handling Robots Material Removal Robots Part Transfer Robots You will like the 6-axis FANUC S-500iB is designed for high-speed smooth movements. The refined movement of the S-500iB R-J3iB, a result of RV speed reducers, is powered by brushless AC servo motors. Cables are routed through hollow joints on the S-500ib arm to reduce interference. The FANUC S-500iB R-J3iB has a slender arm design that increases access to parts and eases installation. It can operate in many environments ranging from harsh to the traditional factory floor. The slender arm design improves robot repeatability and no robot modifications are required for upright, inverted, or wall-mountings.